Oxygen Facial Machine, Nano Water Oxygen Spray Home SPA Facial Care For Deep Moisturizing Beauty
New technology spray 2.0
Multi-combination and instant high-pressure atomization decompose small molecules 5-50 microns, reaching the deep layer, deep Moisturizing all day.
Spray port 2.0
Fine molecules penetrate the skin instantly and penetrate to skin layer
Microcomputer constant pressure jet 2.0
The spray force and quantity are stable and remain unchanged, even spraying.
Battery working time 45 mins
Increase battery capacity
60S effective hydration
High pressure oxygen injection, better skin absorption.
Extract oxygen from the air and compress it into a high concentration of active factors through technical processing.
Skin solution are delivered to the deep layers under 140Kpa pressure, refresh your skin by new way.
Low pressure ,only stays on the skin surface
Optimal pressure, excellent rejuvenation
Excessive pressure ,damage skin epidermis
8 years OEM/ODM
Labeling LOGO
Contact customer service for details
Ordinary oxygen injection instrument
Small spray , large water droplets, can't deeply moisturize, easy to ruin makeup
Hyperbaric oxygen injector
Large spray ,almost no large water droplets, reaches the skin layer , not easy to ruin makeup
3 mins per day
Easily have supple skin
Pure dew/water
Essence
Beauty salon water products
High-concentration products and distilled water are mixed in a ratio of 1:10, and the use effect is better. Too high water density will cause blockage or poor effect
2-stage adjustment, free switching
Switch the valve to adjust the spray size
1st gear
The fine mist is gentle (moisturize when make up)
2 gears
Daily care
Newly upgraded variable frequency motor, easily switch to the suitable gear for you
0.3mm Spray gun pinhole 0.3mm
45 degree wide angle full face moisturizing
Multi-combination and instant high-pressure atomization to decompose small molecules smaller than 5-50 microns
Delicate and moisturizing straight to the depths, keeping you moisturized all day
140Kpa Pressure 140Kpa
6L/min Flow 6L/min
High-pressure water replenishment
Let maintenance no longer be useless
Data witnesses the absorption and penetration effect, doubles the absorption, awakens supple and shiny skin
140KPA high pressure cleansing pores
Hydration +65%
0.3MM nano atomization
Water content +30%
Full face instant penetration in 60 seconds
Test Case
After matching with hydrating products, can see that the skin is more hydrated and delicate
Tips
The product used by the spray gun must be a water-based product, and the product with high concentration and viscosity should be diluted before use
Please inject water or alcohol and spray it again before use to clean the inner wall of the spray gun
After each use, you must pour clean water and clean it again. After spraying, spray it for a few seconds to avoid clogging or water leakage of the spray gun due to the product freezing.
Do not leave the product in the spray can for a long time, use as much as you want to avoid blocking the inner wall of the spray gun
